ALCOHOL PREP PADS AND PRIMER ADHESION PROMOTER WIPES BUNDLE
ALCOHOL PREP PADS AND PRIMER ADHESION PROMOTER WIPES BUNDLE
Regular price
$10.25 USD
Regular price
Sale price
$10.25 USD
Unit price
/
per
This bundle comes with six individually wrapped 70% isopropyl alcohol prep pads for cleaning surfaces.
This bundle comes with three primer adhesion promoter non-woven wipes that are individually wrapped.
These are what we use here in our shop when we're doing install work. These are what we include with some of our products as well. We cannot find a bundle like this on the internet so we wanted to be sure to offer it to you.
If you're installing things like LED lighting, vinyl decals, Stick-on vinyl wrap, tape, etc then this bundle is perfect for you.
The 70% isopropyl alcohol prep pads are perfect for wiping down surfaces to get them absolutely spotless and free of any oils or cleaners. Being that it's 70% isopropyl alcohol it will not destroy plastic surfaces and make the surface fade color. Individually wrapped and will not dry out.
The primer adhesion promoter non-woven pads are designed to activate glue that you find on most common LED Under glow kits, Our STEALTH LED kits, tape backing, Double sided tape backing, Door seals, or vinyl backing that is sticky like what you find on the back of a sticker or decal or vinyl wrap that is a stick-on vinyl wrap. (NON-STATIC)
We've seen things like LED lighting that have been installed without using a primer wipe fall off only after a couple weeks. Whereas using a primer wipe after you've cleaned the surface with a alcohol prep pad, LED lighting and other things that stick to the surface can last for years.
INSTRUCTIONS FOR PROPER USE -
- STEP 1 - Clean the surface that you are applying something too with warm water. Then dry or air dry that surface.
- STEP 2 - Clean the area with the 70% isopropyl alcohol prep pad. Use two pads if you need to. Allow this to dry for 60 seconds.
- STEP 3 - Wipe the area that you're going to be applying something to with the adhesive promoter pad. Allow this to dry for 5 minutes.
- STEP 4 - Complete your install of your LED lighting, vinyl wrap, decal, sticker, tape.
All of our LED lighting kits comes with alcohol prep pads and primer wipes.
US SHIPPING is already configured into the price.